MicroBoards Technology - Micro Orbit

Below are all the different types of MicroBoards Technology. Select the device of your choice, to download the manual

Contents

Error Conditions If the system cannot read a master disc or fails to write to a blank disc the system will stop operation and produce a constant beeping noise This error condition will occur if it detects a bad disc in either TEST or COPY mode When a defective disc is detected the recorder drive tray will open and the disc will be lifted out of the tray The tray will then close and the system will produce the constant beeping noise Remove the completed discs from the output bin and press the button This will drop the failed disc Once the disc is dropped the system will be ready to start another job If you need to complete more copies you will need to place the master disc back on the spindle and have it read into the hard drive again Firmware Upd ...